Cal-Graf Design Home Page

Smokin' the competition . . .

Table Model Adjustable Powder Pour

Call to order: 1.800.367.5203

 

Constructed of brass and wood, the Table Model Adjustable Powder pour is ideal for muzzle loaders and breech loaders to pre-measure charge, drop into plastic or paper tubes. Used for black or smokelss powders, the charge body is hardrock maple and brass, the rest of the Table Model is solid oak with lacquer finish. Clear lacquer allows you to see the black granules & their rate of fall. Like the larger model (Adjustable Powder Pour) the Table Model has a 1/3 to 1/2 cup capacity, enough to pour 20 cartridges at 52 grains before refilling; with FFFg or fine smokeless powder, the Pour accommodates the filling of 50 cartridges.

Pour charges from almost zero to 149 grains FFFg or 130 grains Pyrodex RS. Accuracy is almost ±0 on small granulations and ±.2 (2 tenths grain) or -.1 (one tenth grain) on larger powders such as Pyrodex RS or FFg black. Smokeless Powder--ball powders or small cylindrical powders pour almost ±0 while large granulations such as IMR 4350 pour ±.2 (2 tenths grain). Infinite adjustment lies in the brass charge tube; one turn of the adjustment knob is approximately 1 1/2 grains.

Table Model Adjustable Powder Pour $131.00
(shipping & handling figured at time of purchase)

Call to order: 1.800.367.5203

Visa/Mastercard or send check or money order to Cal-Graf Design, P.O. Box 306

Big Timber, Montana 59011

Cal-Graf Design Home Page

Cowboy Coffin The Original Range Kart

Cowboy Action Cartridge BoxesCowboy No Frills BoxRange Box

Cartridge BoxesThe Wagon BoxBasic Drop TubeFirearms Display and Carry

Rifle ToteSilhouette NeedsCleaning RodsBlackpowder Master Screen

Table Model Adjustable Powder PourExtra Charge Tubes

Adjustable Powder PourCartridge BoardsSecurity for all wooden gun carts

Ammo DrawerSheriff's ChestAdd On Tray