Cal-Graf Design Home Page
Shown is the Simple Cart in pine, finished and unfinished, 16" wheels.
THE Simple Cart
Simple to own $244 for unfinished pine, no wheels (shipping is typically $25; $35 if oak or black walnut because of weight and additional insurance)
Simple to break down into components that fit small spaces. Carriage bolts, wing nuts make removal easy, quick. Pull a pin to remove wheels. Single front leg unscrews from bottom box. Sides separate from both the top and bottom storages.
Shown are finished pine & finished oak, finished black walnut, 16" wheels.
Below is the Simple Cart in pine both finished and unfinshed, one with 12" pneumatic wheels, the other with the 16" hard rubber wire-spoked type. Also shown is a finished oak and, left, finished black walnut Simple Cart. All 4 shown have owners who chose to personalize with their alias engraved on the bottom box lid. We no longer offer engraving out of our shop, but can arrange for you to get the engraving done. These Cart images (below) are for you to compare woods, finished and unfinished; keep in mind the new design has just the stronger, single front leg.
Shown above are the open top box of the finished oak Simple Cart. "Black Hawk's" Cart, a finished black walnut, also shown with both top & bottom boxes open.
Call to order: 1.800.367.5203
Instructional Audio for Simple Cart assembly
This slide show with audio can take 3 to 6 minutes to load depending on your connect speed & internet activity.
LID SUPPORTS, are standard for further convenience and protection for your firearms. The lid supports will hold the lid open for you, plus protect your open actions (levers). Sides are our standard 35" with another top storage that, when opened, provides a small table top. The top box is 14"x 7"x 6." Weight when assembled is around 32-35#. The "transport bar" retains the barrels safely in the Cart simply by turn of a wing nut: loosen to lift off bar, tighten to secure. REPLACE WING NUTS with plastic knobs, easier to get off and on in a hurry: just $1.25 each (9 on each Cart).
The Simple Cart is made of pine with our signature dovetail joinery and is unfinshed, ready for you to make it a personal cart. Overall height of Cart with 16" wheels is 47", with the 12" wheels, height is 45"; width is about 24" with wheels, 17" without.
Again, this unfinished pine cart is of the old style, for illustration only.
The Cart shown is $292.00, with 16" wire-spoked wheels. Another option is a smaller, different type wheel that makes the Simple Cart $272. That wheel is the 12", injection-molded, solid, black wheel--pneumatic, both wheel types shown below. (shipping figured at time of purchase)
The Simple Cart Kit sells for $193 for the pine, no wheels; or $287 in oak, without wheels. Wheels are those shown above: 16" hard rubber, wire-spoked, circa 1890s wheel and 12" pneumatic.
Call for more information or to order. 1-800-367-5203
Shipping & handling on most cart orders will be $25.00; $35 if oak or black walnut because of weight and insurance.
RETURN TO TOP
Cowboy Coffin The Original Range Kart
Cartridge BoxesThe Wagon BoxBasic Drop TubeFirearms Display and Carry
Rifle ToteSilhouette NeedsCleaning RodsBlackpowder Master Screen
Table Model Adjustable Powder PourExtra Charge Tubes
Adjustable Powder PourCartridge BoardsSecurity for all wooden gun carts
Ammo DrawerSheriff's ChestAdd On Tray