Parts for the Simple Cart KIT
2) 3/8x16 tee nuts w/ 2legs
36) finish nails 1 1/4" long
4) gold 1 1/4 wood screws w/2 lid braces
16) #5x1/2 flat-head wood screws
2) 8x1 1/16 piano hinges
8) #5x1/2 roud-head wiid screws
1) package of (2) sanp catches
1) 8x32x5?8 truss-head machine screw
1) 8x32 threaded zinc insert, muzzle brace
1) 1/4x20x1 1/2 threaded stud
1) 1/2 flat washer
1) 1/4x20 steel wing nut
1) bag assembly parts as per final assembly sheet to be used after completing KIT, not shown on this sheet.

Go to home page
Click here for the bottom box instructions
Tools needed for the assembly:

Yellow water-resistant glue, Gorilla glue or some other polyurethane glue for the dove tails, sandpaper, wood filler, hammer & nail set. Other helpful tools but not necessary; 4-clamps (able to extend to 24"), router for radiusing corners.

Assembly instructions for the Simple Cart KIT

It is highly recommended to dry-assemble the pieces before gluing.

DO NOT start your finishing until all parts are assembled and entire Cart has been put together.